Installation Of The Control Panel - König Electronic SEC-ALARM200 Mode D'emploi

WIRELESS ALARM SYSTEM
QUICK SETUP GUIDE
Functions include:
Alert – Advises you to what is happening around the house.
Alarm – Protects your home / assets while you are away.
Communication – Calls you during an emergency, you can also call in to perform a variety of
operations.
This Quick Guide will show you how to setup the system and use basic functions. It is strongly
recommended that you refer to the User's Instructions for full illustrations on how the system should be
installed and operated.

Installation of the Control Panel

1. Plug in the adapter to a wall socket
and the other end should be
connected to the socket on the
Control Panel marked "DC 12 V". You
should hear 3 beeps.
2. Remove the screw on the battery
cover and insert 4 pcs of AAA
batteries into the battery holder.
Tighten the screw afterwards.
3. Plug in a phone line from the "LINE"
socket to the phone outlet on the
wall.
4. If you want to connect a telephone to
the Control Panel, the phone can be
plugged into the socket marked
"PHONE" on the Control Panel.
ENGLISH
2