Publicité
Les langues disponibles
Les langues disponibles
DANGER
AREA
10.6
CHANGE TO THE EDGING MODE
The machine can be used in combination with the edge
guide for edging sidewalks and walkways.
1. Stop the machine and flip down the edge guide from
stored position.
2. Loosen the telescoping boom coupler (1) and turn the
trimmer head 180 degrees until the trimmer head locks
into position.
3. Tighten the coupler.
DIRECTION OF
ROTATION
BEST CUTTING AREA
NOTE
1
English
10.7
PIVOTING HEAD FUNCTION
B
C
D
Adjust pivoting head to trim areas which are hard to reach
and for users to operate comfortably.
1. Stop the machine.
2. Push on the pivoting button (1) and turn the shaft until the
trimmer head locks into required position.
3. Release the pivoting button.
10.8
ADJUST THE LENGTH OF THE
SHAFT
You can adjust the length of the shaft to operate the
machine easily.
1. Stop the machine.
2. Loosen the telescoping boom coupler (1) and move the
shaft to the desired position.
9
A
1
NOTE
NOTE
EN
Publicité
