Fantech 405335 Manuel D'installation page 2

All manuals and user guides at all-guides.com
Note Important Information Technical Practical tip
note information
PLEASE READ THIS MANUAL BEFORE INSTALLING UNIT
For residential use only
Before installation careful consideration must be given to how this system will operate if connected to
any other piece of mechanical equipment, i.e. a forced air furnace or air handler operating at a higher
static pressure. After installation, the compatibility of the two pieces of equipment must be confirmed by
measuring the airflow of the Heat Recovery Ventilator using the balancing procedure found in this manual.
It is always important to assess how the operation of any HRV may interact with vented combustion
equipment (i.e. Gas Furnaces, Oil Furnaces, Wood Stoves, etc.)
Products are designed and manufactured to provide reliable performance, but they are not guaran-
teed to be 100% free of defects. Even reliable products will experience occasional failures, and this
possibility should be recognized by the user. If these products are used in a life support ventilation
system where failure could result in loss or injury, the user should provide adequate back-up ven-
tilation, supplementary natural ventilation or failure alarm system, or acknowledge willingness to
accept the risk of such loss or injury.
Your ventilation system should be installed in accordance with the local building code that is in
effect, in absence of such requirements, it is recommenced to check with local authorities having
jurisdiction in your area prior to installing this product
.
2