Kenwood DPX793BH Mode D'emploi page 48

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
Symptom
Remedy
"DEVICE FULL"
The number of registered devices has reached its limit. Retry
after deleting an unnecessary device.
( 25, DEVICE DELETE)
"N/A VOICE TAG"
Make sure the same voice as the registered voice tag is used.
"NOT SUPPORT"
The connected phone does not support Voice Recognition
feature or phonebook transfer.
"NO ENTRY"/"NO PAIR"
There is no registered device connected/found via Bluetooth.
"ERROR"
Try the operation again. If "ERROR" appears again, check if
the device supports the function you have tried.
"NO INFO"/"NO DATA"
Bluetooth device cannot get the contact information.
"HF ERROR XX"/
Reset the unit and try the operation again. If this does not
"BT ERROR"
solve the problem, consult your nearest service center.
"SWITCHING NG"
The connected phones might not support phone switching
feature.
44
ENGLISH
SPECIFICATIONS
FM
Frequency Range
Usable Sensitivity
(S/N = 30 dB, Dev 22.5 kHz)
Quieting Sensitivity
(S/N = 46 dB, Dev 40 kHz)
Frequency Response
(±3 dB)
Signal-to-Noise Ratio
Stereo Separation (1 kHz)
AM Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Frequency Response
(±3 dB)
Signal-to-Noise Ratio
/
/
/
:
87.9 MHz — 107.9 MHz (200 kHz space)
:
87.5 MHz — 108.0 MHz (50 kHz space)
8.2 dBf (0.71 μV/75 Ω)
17.2 dBf (2.0 μV/75 Ω)
HD Radio Broadcast:
20 Hz — 20 kHz
Conventional Broadcast: 30 Hz — 15 kHz
HD Radio Broadcast:
75 dB (STEREO)
Conventional Broadcast: 64 dB (MONO)
40 dB
530 kHz — 1 700 kHz (10 kHz space)
29 dBμ (28.2 μV)
HD Radio Broadcast:
40 Hz — 15 kHz
HD Radio Broadcast:
70 dB (STEREO)
/

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dpx593btDpx540btDpx523btDpx503btDpx303mbt

Table des Matières