Valor L1 Serie Instructions D'installation

1550v2 Linear 3-1/2" Surround Kit
Approved for use with Valor Models 1500 and 1600 Heaters ONLY
DANGER
!
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall be
installed for the protection of children and other at-risk
individuals.
46-3/16" (1173 mm)
Trim size
The 1550v2 Linear 3-1/2" Surround Kit is designed to be
used on the Linear L1 1500 and Linear L1 2-sided 1600
Valor heaters.
The application of this kit does not affect the venting
capabilities or method of preparation of the heater as
described in the heater installation manual.
This trim fi ts fl at against the cement board with the ability
to tuck additional non-combustible materials up to 1/2
inch thickness behind the trim.
Replacing the side panels on the trim allow non-
combustible material thickness to be increased to 1 inch.
4005356-01
© Copyright Miles Industries Ltd., 2015.
All manuals and user guides at all-guides.com
L1 S
ERIES
(1550LFBv2, 1550LFPv2, 1550LFZv2)
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
1-3/8" (35 mm)
Thickness
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual for
future reference.
Notes: This kit must be installed
or serviced by a qualifi ed installer,
service agency or gas supplier.
These instructions are to be used
in conjunction with the main
installation instructions for the
above listed heater models.
LH Trim panel
LH Side door
Barrier screen
Overview (Fireplace engines sold separately)
Non-combustible
cement board
Plinth
RH Side
door
Trim
RH Trim panel