Avidsen YLVA 3+ Mode D'emploi page 25

ADDITIONAL INTERCOM PANEL FOR THE VIDEOPHONE
C - INSTALLATION
The cable's length determines which cable section is to be used:
Cable length
0 to 50 m
50 m to 100 m
Between the intercom panel and an electric strike plate (not included)
Use a 12V/1.1A maximum electric latch with or without mechanical memory.
For the connection between the intercom panel and the door release, use a cable of this kind:
Cable length
0 to 50 m
Between the intercom panel and the automated gate (not included)
Section to use: Min. 0.75 mm2
2.1 - CONNECTION BETWEEN THE MONITOR AND THE INTERCOM PANEL
IMPORTANT: connect terminals 3 and 4 directly to the opening/closing contact of the automatic control
system (automated entryway wired control system input).
EN
All manuals and user guides at all-guides.com
+
1
-
2
Monitor
Section to use
0.75 mm2
1.5 mm2
Section to use
0.75 mm2
Intercom panel
EN EN
9