Télécharger Imprimer la page

Avidsen YLVA 3+ Mode D'emploi page 21

Masquer les pouces Voir aussi pour YLVA 3+:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 5
ADDITIONAL INTERCOM PANEL FOR THE VIDEOPHONE
1 - INTRODUCTION
This pack includes an additional intercom panel
that is compatible with the following video intercom
references:
- 112266: Ylva 3
- 112271: Ylva 3+
- 112272: Ylva 3+ compact
Key features:
• Colour video reception: when a visitor presses
the intercom panel call button, the panel
immediately transmits the image to the screen
(not supplied) and a chime indicates the
visitor's presence.
• Automatic exposure correction: the video
camera automatically adjusts its exposure to
match the ambient light conditions.
• Enables control over two entrances (lock and
automatic control system).
• Integrated infrared vision enables the video
camera to identify visitors without needing
additional light.
• Opening an electric strike plate or automated
entryway (not included) when one of the two
provided user badges is shown.
IMPORTANT: You must read these instructions
carefully prior to installation. In the event of
problems, our Hotline technicians are at
your service for any information.
WARNING: any connection error may
cause damage to the device and void the
warranty.
2 - MAINTENANCE AND INSTALLATION
GUIDANCE
Before installing the intercom, it is important to
check the following points:
• Do not install in cases of extreme humidity,
temperatures, corrosion risk or dust.
• Do not expose to direct sunlight, rain, or high
humidity.
• Do not plug the device into a multi-socket plug
adaptor or extension cord.
• Be careful not to lose the administrator badge
(red colour) or your product will be locked and
the warranty voided.
Keep it in a safe place.
All manuals and user guides at all-guides.com
A - SAFETY INSTRUCTIONS
• Do not install near other electronic devices such
as computers, televisions or video recorders.
• Do not install near acidic chemicals, ammonia
or sources of toxic gases.
• Do not clean with abrasive or corrosive
products. Use a damp cloth with soapy water.
• Unplug the device if it is not being used for an
extended period of time.
• Do
not
plug
the
telecommunications installations.
• The cable between the monitor and intercom
panel must not be extended. Avoid junctions
(insulating screw joints, soldered joints, etc.)
3 - RECYCLING
This logo denotes that devices which are
no longer in use must not be disposed of
as household waste.
They are likely to contain hazardous
substances that are dangerous to both
health and the environment. Return
the equipment to your local distributor or use the
recycling collection service provided by your local
council.
Pour en savoir plus :
www.quefairedemesdechets.fr
device
into
national
EN
5

Publicité

loading

Ce manuel est également adapté pour:

112273