Beko BKS 1350 T Manuel D'utilisation page 7

3 Use
3.1 Initial use
1. Take out all packaging and label materials
and dispose of them in accordance with the
applicable local regulations.
2. Clean the appliance before first use (Refer to
"Cleaning and Maintenance" section).
3. Make sure that the appliance stands upright
on a balanced, flat, clean, dry and nonskid
surface.
3.2 Installation of the vacuum
cleaner
1. Insert the hose assembly into the air intake of
your vacuum cleaner. Flexible hose (16) shall be
seated with a click.
2. Insert the wide end of the telescopic tube (15)
to the other end of the flexible hose (16).
3. Install the adjustable parquet/carpet brush (14)
to the telescopic tube (15).
Vacuum cleaner / User manual
All manuals and user guides at all-guides.com
3.2.1 Attaching / Detaching the dust
container
1. Unplug the appliance.
2. Press the dust container opening button (7)
3. Ensure that the upper cover (6) is seated firmly
3.3 Operation
Pull out the power cord in the required length
before plugging in the appliance to the mains.
C
C
A
to remove the dust container (4) and remove
the dust container by holding from the dust
container handle (5).
when the dust container is placed correctly.
Dust container
removal button
Always pull out at least two thirds
of the cord to prevent the power
cord from overheating during the
operation of the appliance.
Cord should be pulled out between
the yellow and red signs on the cord
ideally.
WARNING: Never pull out the power
cord beyond the red mark. Pulling
out the cord beyond the red mark
may damage the appliance.
Dust container
carrying handle
7 / 57 EN