Ergomotion ADJUSTABLE BASE quest 1.5 Manuel Du Propriétaire page 15

emergency battery backup strap
For emergency use only, in case of a power outage.
Batteries are not to be used for normal operation of the bed.
1
Disconnect the Power Supply from the Input Cord.
Power Supply
2
Connect the Battery Backup Strap
to the (2) 9 Volt alkaline batteries.
Do not mix brand name batteries.
Control Box
Input Cord
3
Connect the end of the Battery Backup Strap to the Input Cord
that is attached to the Control Box.
Battery Backup Strap
4
Use the remote to return the base to a flat position.
Note: Detach the Battery Backup Strap and reconnect the
power supply after the emergency is over, as the system will
continue to draw power from the batteries even if not in use.
Control Box
Input Cord
13