Publicité
Les langues disponibles
Les langues disponibles
pairing remote control
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event
that the remote is not paired with the base, follow the steps below.
1
Unplug the Power Cord from your power outlet. Wait 1 minute, then
plug it back into your power outlet. Perform Step 2 within 10 seconds,
while the control box light is flashing.
Power Supply
2
Hold the Head Up and Head Down buttons on the remote,
until the backlight on the remote starts flashing.
When the LED light on the control box stops flashing, release
the Head Up and Head Down buttons. The pairing process
is completed.
Power Cord
3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or call
Ergomotion customer service: 1-888-550-3746
9
Publicité
