Télécharger Imprimer la page

Whirlpool WTW4820XQ0 Guide D'utilisation Et D'entretien page 8

Publicité

Les langues disponibles

Les langues disponibles

7,
Select
LOAD SiZE
LOAD SIZE
9,
Select options
(on some models)
o
OPTIONS
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Super will
add the most amount of water for large or bulky loads. Items
need to move freely.
Select the desired cycle options. If you are using fabric
softener, be sure to select one of the Fabric Softener Added
options.
8,
Select
TEMPERATURE
TEMPERATURE
all cold
rinses
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the appropriate
setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Hot
Some cold water is added to save
Whites and pastels
energy. This will be cooler than
Durable garments
your hot water heater setting.
Heavy soils
Warm
Some cold water will be added, so
Bright colors
this will be cooler than what your
Moderate to light soils
Cool
Warm water may be added to
assist in soil removal and to help
dissolve detergents.
Colors that bleed
or fade
Cold
This is the temperature from your
Dark colors that
faucet. If your tap cold water is
bleed or fade
very cold, warm water may be
Light soils
added to assist in soil removal and
help dissolve detergent.
Press START/Pause/Unlock
to begin wash cycle
START
Pause/Unlock
Hold 0
3 se¢ to
cancel
Press the START/Pause/Unlock
button to start the wash cycle.
When the cycle has finished, the DONE indicator will light.
Promptly remove garments after cycle has completed to avoid
odor, reduce wrinkling, and rusting of metal hooks, zippers,
and snaps.
Unlocking
the lid to add garments:
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock;
the lid will unlock once the
washer movement
has stopped. This may take several
minutes if the load was spinning at high speed. Then close
lid and press START/Pause/Unlock
again to restart the cycle.
If lid is left open for more than 10 minutes the water will pump
out automatically.
8

Publicité

loading