Télécharger Imprimer la page

Whirlpool WTW4820XQ0 Guide D'utilisation Et D'entretien page 14

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)
to possibly avoid the cost of a service call..Jn U.S.A. http://www.whirlpool.com/help
- In Canada www.whirlpool.ca
Not cleaning or
removing stains (cont.)
Using too much detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Not washing like colors together.
The suds from too much detergent can keep washer from
operating correctly. Always measure detergent and follow
manufacturer's
directions based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
Use Heavy cycle for tough cleaning.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle. Select Fabric Softener
Added Yes when using fabric softener.
Do not add products directly to load.
Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
Incorrect dispenser
Clogged dispenser.
Use only liquid chlorine bleach in the bleach dispenser. Use only
operation
fabric softener in the fabric softener dispenser.
Fabric damage
Sharp items were in pockets during
Empty pockets, zip zippers, and snap or hook fasteners before
wash cycle,
washing to avoid snags and tears.
Tie all strings and straps before starting wash load.
Mend rips and broken threads in seams before washing.
Strings and straps could have tangled.
Htems may have been damaged before
washing.
Fabric damage can occur if load is
tightly packed.
Liquid chlorine bleach may have been
added incorrectly.
Garment care instructions
may not
have been followed.
Odors
Monthly maintenance not done as
recommended.
Using too much detergent.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
recommended
by manufacturer.
Do not place load items on top of bleach dispenser when
loading and unloading washer.
Always read and follow garment manufacturer's
care label
instructions.
See "Cleaning Your Washer" in Washer Maintenance.
Unload washer as soon as cycle is complete.
Be sure to measure correctly. Always follow the manufacturer's
directions.
See "CJeaning your Washer" section.
J
14

Publicité

loading