Publicité
Les langues disponibles
Les langues disponibles
Damp Alert
This option alerts you when shirts and other items that require ironing are dry enough to be suitable for
ironing.
1. Select a cycle and change the cycle settings as necessary.
-
This option is available for Normal, AI Optimal Dry, Super Speed, Delicates, Activewear, Denim,
Shirts, Blouses, Perm Press, and Eco Normal with Dryness set to 2-5.
2. Tap Options.
3. Turn the Navigation dial to select Damp Alert, and then tap OK.
4. Tap OK to select On or Off.
Optional filter
If you installed the Optional Filter to prevent dust accumulation on the heat exchanger, use this setting to
set the filter cleaning alert on or off.
1. Tap Options.
2. Turn the Navigation dial to select Optional filter, and then tap OK
3. Tap OK to select On or Off.
-
Select On to receive a filter cleaning alert message.
NOTE
If the "Remove optional filter to clean", "Clean heat exchanger & tap OK" or "Clean heat exchanger optional
filter & tap OK" message appears on the display, clean both the heat exchanger and the Optional Filter.
(Refer to the "Heat exchanger" section on page 63 and the "Micro soft filter (Optional Filter)" section on
page 65.)
My Cycles
Add or remove cycles to create a personal cycle list.
1. Tap Options.
2. Turn the Navigation dial to select My Cycles, and then tap OK.
-
You can only edit a cycle to create a personal cycle when the dryer is not operating.
3. Turn the Navigation dial to select the desired cycle.
4. Tap OK to add or remove the selected cycle.
-
The addition and removal of a cycle are saved automatically.
5. Tap Options or select Back to finish My Cycles setting.
NOTE
The Normal cycle cannot be removed from the cycles list.
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 49
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 49
English 49
2023/6/29 15:28:04
2023/6/29 15:28:04
Publicité
