Publicité
Les langues disponibles
Les langues disponibles
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 39
DV8900HB_SimpleUX_WEB_OID57652_01_English.indd 39
9. Remove the single screw from the back of the door
hinge.
NOTE
This is the screw that supports the door against the
frame so you can unscrew or screw in the hinge without
needing to support the door yourself.
10. Insert the screw you just removed into the other
screw hole on the back of the door hinge, and then
tighten.
11. Place the door on the other side, and then reattach it
to the dryer.
NOTE
Insert the head of the screw on the back of the hinge
into the hole above the cut-out in the frame, and then
slide the door hinge down until it stops. Make sure the
protrusion on the back of the hinge is pressed into the
cut-out before you tighten the hinge screws.
12. Push the lever holder into the cut-out on the other
side of the door opening. Insert screws, and then
tighten as shown.
English 39
2023/6/29 15:28:01
2023/6/29 15:28:01
Publicité
