Hama 00062755 Mode D'emploi page 7

g Operating instruction d Bedienungsanleitung
Package contents:
• USB 2.0 4-way PCI card
• Printed guide
• Package slip with disposal instructions
Safety instructions:
• Be aware that static electricity can
damage both the card and your
computer.
• Ground yourself by touching a metal
object.
• Keep this device away from heaters and
radiators, and free of dust or dampness
when being operated.
Installing the hardware:
You must open your computer to install
the card. Ensure that you have fi rst
disconnected your computer from the
power supply. If you are not familiar with
the internal setup of your computer, please
consult your computer manual or ask a
qualifi ed technician.
• Switch off your computer and all
connected devices.
• Unplug your PC before beginning
installation.
• Open the case of the computer.
• Hold the PCI card by the edges of the
printed circuit board and insert it into
the free PCI slot.
Note: Be aware that static electricity
can damage both the PCI card and your
computer. Ground yourself by touching a
metal object.
6
00062755bda.indd Abs1:6 00062755bda.indd Abs1:6
• Select a free PCI slot.
• Remove the plate for this slot. Keep the
screw – you will need it later to secure
the PCI card.
• Carefully push the card into the slot until
the holding bracket is lined up with the
casing and the gold-plated contacts
have disappeared into the slot.
• Secure the card using the slot cover
plate screw you removed earlier.
• Close the case of your computer, and
reconnect it to the power supply.
• Restart your computer.
Installing the software:
Installation on Windows Vista 32-bit
editions
Card
PC
Because Windows Vista already includes
the necessary drivers, you do not need to
install any drivers separately. After you
have inserted the card into your computer
and restarted Vista, the computer reco-
gnizes and installs the card after a short
time.
Slot-metal
27.07.2007 11:38:41 Uhr 27.07.2007 11:38:41 Uhr