Hisense RF21A3FSE Guide D'utilisation Et D'entretien page 14

1. Unplug refrigerator or disconnect power.
2. Clean the interior.
Hand wash, rinse, and dry removable parts and
interior surfaces thoroughly. Use a clean sponge or
soft cloth and a mild detergent in warm water.
3. Clean the door and drawer seals (gaskets). A dirty or
sticky seal may adhere to the cabinet and tear when you
open the door.
Using a soft cloth and a solution of mild detergent
and warm water, hand wash the door seals. Rinse
with clear water and dry thoroughly.
4. Clean the exterior surfaces.
Wash exterior surfaces with a clean, soft cloth or sponge
and a mild detergent in warm water. Rinse surfaces with
clean, warm water and dry immediately to avoid water
spots.
5. Plug in refrigerator or reconnect power.
Interior Lights
IMPORTANT: Your refrigerator is equipped with LED
lighting. These lights are designed to last for the life
of your refrigerator. However, if the lights stop
operating, please contact a qualified technician for
replacement.
Vacation and Moving Care
Vacation
If you choose to leave the refrigerator "Powered
On" while you are away :
1. Consume all perishables food items and freeze the
others.
If you choose to "turn off" the Refrigerator before you
leave:
1. Remove all food from the refrigerator and
freezer.
2. Unplug refrigerator or disconnect power.
3. Clean refrigerator, wipe it, and dry well.
4. Use tape (rubber) or wood blocks on the the top of
both doors to create an opening enough which lets air to
circulate within in, to stop odor and mold from building up.
Moving
WARNING
Fire or Explosion Hazard
Do not puncture refrigerant tubing.
Follow handling instructions carefully. Flammable
refrigerant used.
Failure to do so can result in death, explosion or fire.
IMPORTANT: Handle with care when moving
refrigerator to avoid either damaging the refrigerant
tubing or increasing the risk of a leak.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install refrigerator.
Failure to do so can result in back or other injury.
When you are moving your refrigerator to a new home,
follow these steps to prepare it for the move.
1. Remove all food from the refrigerator and pack all
frozen food in dry ice.
2. Unplug refrigerator.
3. Clean, wipe, and dry thoroughly.
4. Take out all removable parts, wrap them well, and
tape them together so they don't shift and rattle
during the move.
5. Raise the leveling legs so they don't scrape the floor.
See "Level Refrigerator."
6. Tape the doors closed and tape the power cord to the
back of the refrigerator. When you get to your new
home, put everything back and refer to the
"Installation Instructions" section for preparation
instructions.
Reinstalling/Using Refrigerator
Again
If the refrigerator has been placed in a horizontal or tilted
position for any period of time wait
4 hours before plugging it in to allow the oil to settle into
the compressor.
1. Clean refrigerator. See "Cleaning."
2. Place refrigerator in desired location and level. See
"Installation Instructions."
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the
power cord plug.
Do not use an adapter.
Do not use an extension cord. Failure to do
so can result in death, fire or electrical
shock.
3. Plug into grounded 3 prong outlet.
14