Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND SHALL NOT BE USED IN A BUILDING,
GARAGE OR ANY OTHER ENCLOSED AREA.
PREPARING TO LIGHT YOUR GRILL
MOVING INSTRUCTIONS
Caution: Never move the grill with burner lit or still hot.
Make sure control knob is in the "OFF" () position. Disconnect the LPG cylinder from the regulator.
Remove the regulator from the LPG tank. Be sure the grill has completely cooled for at least 30 minutes.
Close the lid. Use the side handles to carry the grill.
NOTE: It is best to leave the grease tray in place attached to the bottom of the grill; some grease may
continue to drip from drain hole during transport.
23
STEP 1
FIND A LEVEL SURFACE ON WHICH TO PLACE THE GRILL.
STEP 2
CONNECTING THE REGULATOR TO THE LPG CYLINDER
1. Turn off the control valve at regulator to "OFF" by turning
clockwise until tight.
2. Install new LPG cylinder by pushing cylinder into regulator
and turn clockwise until tight. Place cylinder into cylinder
support bracket. Only disposable gas cylinder that can fit
within the support bracket shall be used.
Publicité
