Publicité
Les langues disponibles
Les langues disponibles
WARNING:
DO NOT STORE GRILL INDOORS UNLESS THE CYLINDER IS DISCONNECTED. DO NOT STORE CYLINDER
IN A BUILDING, GARAGE, OR ANY OTHER ENCLOSED AREA, AND KEEP OUT OF REACH OF CHILDREN
AT ALL TIMES.
INSTALLER FINAL CHECK
Maintain specified clearance of 91.44 cm (36 in) from combustible materials and construction.
1.
All internal packaging has been removed.
2. The hose and regulator are properly connected to the LPG cylinder.
3. The unit has been tested and is free of leaks.
4. The gas supply shutoff valve has been located.
STEP 3
TO TEST
1. Open the lid and turn the control valve at regulator to "ON"
2. Press the igintion button until the grill is lit.
3. Apply the soap water solution to all gas fittings. Soap bubbles
will appear where a leak is present.
4. If a leak is present, immediately turn the gas supply to the
CLOSED position. Tighten leaky fittings to address the
leakage.
5. Turn the gas supply back to the OPEN position and retest.
6. Should the gas continue to leak from any of the fittings,
turn the LPG cylinder valve to the CLOSED position and
contact our Customer Service Department at 0800-
908-612. Or email us at ServiceFR@nexgrill.com for
assistance.
7. If there is evidence of excessive abrasion or wear, or the
hose is cut, it must be replaced prior to the grill being put
into operation.
22
Publicité
