Dacor DOP48C96D Serie Instructions D'utilisation page 30

Installation Instructions
Round Burner Head/Cap
CAUTION
Ensure all burner components (heads and caps) rest flat and snugly in place.
30 English
INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 30 INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 30
2. Install the burner head so the electrode passes
through its opening in the head. Ensure the burner
head lies flat atop the base.
Match the burner caps to the burners by size, then
3.
install the caps on the heads.
1. Put the burner heads on the burner bases as shown
at left. The bottom of the head fits within the burner
base.
2. Turn the head until it drops into place. Twist the
head back and forth slightly to ensure it is properly
seated.
3. Put the burner caps (brass or porcelain) atop the
burner heads. The ridge around the bottom edge of
the cap fits around the top of the burner head.
2023-02-23 오전 9:45:29 2023-02-23 오전 9:45:29