Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Final Installation
Leveling leg
26
English
INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 26
INSTALL_DOP48C96DLS_DA_DG68-01511A-00_EN+MES+CFR.indb 26
1.
Make sure the range is positioned where you want it.
2.
Using a wrench, level the range by turning the front
leveling legs in or out as necessary. Counterclockwise
shortens the leg and lowers the range. Clockwise
lengthens the leg and raises the range.
NOTE
•
Adjusting the two front legs is usually sufficient, but
adjust all four legs if necessary.
•
Adjust the leveling legs only as far as necessary to
level the range. Extending the leveling legs more
than necessary or removing legs can cause the range
to be unstable.
3.
If range is next to or between cabinets, make sure
the cooktop (without the surface burner grates) is
level with the countertops.
4.
Position an oven rack in the center rack position.
5.
Check the level of the range with a carpenter level
using the two positions shown at right.
6.
After the range becomes level, slide the range away
from the wall so that the anti-tip bracket can be
installed.
7.
After installing and leveling the range, install front
leg covers (right and left).
2023-02-23 오전 9:45:28
2023-02-23 오전 9:45:28
Publicité
