Publicité
www.raider.bg
18
Problems
Machine is not
starting
The engine stops
Working pressure is
too high
Pulsing pressure
The engine is
working but there is
no pressure
If necessary, repair your machine is best carried out only by qualified specialists in
workshops RAIDER, which used only original spare parts. Thus ensuring their safe operation.
11. Environmental protection.
Do not dispose of disused electric household waste! In order to protect the environment
and Directive 2012/19/EC, they must be collected separately and be subjected to appropriate
processing for recovery of the information contained in these materials.
All manuals and user guides at all-guides.com
Cause
the plug is not inserted in
the socket.
the socket is broken.
The safety switch has been
activated
The extension cable is
damaged
The automated protection
has bee activated
The nozzle is partly stuck
There is air in the ump or
the hose..
Watter feeding is not good.
Water filter (6а) need
cleaning.
The water hose is twisted
or folded.
There is no water feeding.
The filter (6а) need
cleaning.
What to do
Insert the plug in the socket
Use another socket
After checking the reason for activation of
the safety swith, replace it (ot switch it on)
Replace it.
Wait a few minutes untill engine cools
Check and clean it
Remove the extra air
Ensure that the parametserof the water
network are appropriate.
Check and clean the water filter.
Check and fix it
Turn the water supply on.
Check and clean the water filter.
Publicité
