Publicité
www.raider.bg
14
or environmentally hazardous substances. We recommend that you store cleaning products out
of reach of children. In preparation of falling into them immediately flush eyes with plenty of water,
if swallowed by a specialized preparation immediately seek medical help.
1.20. When cleaning vehicles and observe the local regulations do not allow product of machine
oil in groundwater.
1.21. High pressure cleaner must be connected to a water distribution network with a maximum
pressure of 0.7MPa. If the pressure in your water system is higher, the compulsory fitting reducer
valve to reduce pressure to recommended.
1.22. For greater security guard has shot against accidental inclusion. When he was activated
spreypistoletat can not spray water.
1.23. High pressure cleaner have automatic protection against overload. This is a thermal sensor
that protects the motor from overheating congestion. If overloaded, the machine will stop and have
to wait a few minutes until cool.
1.24. In no case should be approaching the nozzle of less than 30 cm from the surface cleaning
¬ ness (if you suspect that water pressure could cause damage, should first try directing it to the
stream surface of a small hidden place) .
1.25. Not permitted the use of high pressure cleaner washing of surfaces, which can be easily
removed top layer. Necessarily have to be moved by water jet cleaning surface. It should not be
allowed to stream ¬ s continued to be directed at the same place, because it can cause damage to
the surface.
1.26. Necessarily before attempting to pressure washer should consult with the supplier of the
product intended for washing, that its surface is adapted for high pressure washer.
1.27. Failure to comply with the instructions may lead to electric shock, fire and / or severe
injuries.
2. Functional description and purpose. You purchased high pressure device for home use and is
intended for washing the surfaces under high water pressure. ¬ head is intended for washing cars,
motorcycles, boats, caravans, trailers, patio, windows, masonry barbecues, garden furniture and
lawn mowers.
Not permitted the use of high pressure cleaner for activities other than its intended purpose.
3. Assembly of the elements of high pressure cleaner and commissioning.
3.1. High pressure cleaner Place on a flat, dry, stable and horizontal space.
3.2. Make sure it is protected from rain and direct water spray.
3.3. All joints and connections on suction and Injection piping must be firm, precise and tight
checked for leaks.
3.4. Failure due to work high pressure cleaner dry, the security lapse.
3.5. Emerging from the nozzle, high pressure stream of water produces reactive power, so keep
the spray gun and the tube always firmly with both hands.
3.6. Installation of the holder of the spray gun;
Press the holder to the body of high pressure cleaner in a specified location on the lower figure
B and slide down.
A
All manuals and user guides at all-guides.com
Publicité
