Publicité
General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric
shock, fire and / or severe injuries. Keep these instructions in a safe place.
1. Safety.
1.1. It is mandatory inclusion of high pressure cleaner only electric plants equipped with electric
switch Fi (safety shut-off switch with Residual protection), and current leakage, which is triggered
when RCD (Residual Current Device), RCD must be no more than 30 mA. Information on the voltage
of the electricity network and the type of plate must comply with the data on your grid.
1.2. Use only extension cord 3 × 1,5 mm2 the maximum length of 20 m and plug capable
compound with an increased degree of moisture resistance and protection from water splashes.
In use, extension of the cable and plug contacts must be fitted with a grounding conductor. Cables
and extension leads must not be coiled or twisted. It is necessary to protect high pressure cleaner
direct influence of rain. All electrical connections must be protected from moisture. Contacts and
plugs should be dry and not lying on the ground. Be assured that under no circumstances will the
water and moisture to reach or contact high pressure cleaner.
1.3. Never touch the plug with wet hands.
1.4. High pressure cleaner stream of water should not be aimed at people, electrical appliances,
animals or high pressure cleaner itself.
1.5. Not permitted directing flow against themselves or other people to clean clothing or shoes.
1.6. Not permitted the use of high pressure cleaner by children. Take the necessary steps to
prevent children's access to high pressure cleaner or power cord.
1.7. High pressure cleaner should not be included without water!
1.8. Keep space around high pressure cleaner clean and well lit. Disarray and poor lighting may
contribute to the occurrence of accidents.
1.9. High pressure cleaner should be stored at temperatures above 0 ° C.
1.10. Protect the power cord from heat, oil, contact with sharp edges or points of mobile
machines. Damaged or twisted cables increase the risk of electric shock.
1.11. Should be excluded from high pressure cleaner power before carrying out maintenance
work in. Do not let high pressure cleaner be pulled and held for the power cord.
1.12. In order to ensure safety should only use genuine parts or parts recommended by the
manufacturer. Not permitted the use of high pressure cleaner provided that the power cord or other
element of high pressure cleaner damaged. Damaged power cables increase the risk of electric
shock.
1.13. High pressure cleaner designed so that all moving parts and hull ensure safe conditions for
use. For damage caused by attempts to change the structure of high pressure cleaner manufacturer
is not liable.
1.14. Not permitted the use of high pressure cleaner working with other liquids except plain
water.
1.15. Do not bend hose, high pressure and not go through it with the car.
1.16. Not be allowed to suction fluids containing solvents, acids, acetone, including gasoline,
paint thinners and naphtha, as they are flammable, explosive and poisonous. When using high
pressure cleaner in high-risk areas (eg fuel tanks) should be respected force in the case of safety
regulations. Not be allowed in work areas with an increased risk of explosions.
1.17. Not allowed spraying of materials containing asbestos and other substances harmful to
health.
1.18. Use only tested cleaning. Improper cleaning may damage the machine and cleaning items.
1.19. Do not use undiluted detergents. Products are safe so far do not contain acids, bases
All manuals and user guides at all-guides.com
13
Publicité
