Publicité
4.11. Perform the washing intended.
4.12. High pressure cleaner protect against overload. Should be activated by overload protective
circuit should stop work and turn off high pressure cleaner. Wait a few minutes until cool high
pressure cleaner and only then resume work.
4.13. Automatic stop function. When the trigger of the pistol grip is released, electric motor stops.
While high pressure is released, thereby increasing the durability of the machine and reduces the
cost of energy.
5. Exclude high pressure cleaner.
5.1. Release the trigger. Unblocking press a button. This spray gun is secured against inadvertent
inclusion. Turn off trigger switch (1). Close the water valve and remove plug from outlet.
5.2. In this situation the machine and hoses remain under pressure. To release the pressure
continue to exclude the following actions. Unblocking press button to release the trigger. Press the
shutter all the way until the water pressure drops in the machine. Release the trigger. Unblocking
press a button. Disconnect water hoses from the machine and the water supply network.
5.3. For prolonged stay of high pressure cleaner and hoses should be drained and the water high
pressure cleaner to return in a dry place at temperatures above 5 ° C.
5.4. Do not bend hose, high pressure!
5.5. The security lapse in freezing the machine!
6. Maintenance.
WARNING! Always unplug the plug from the wall outlet before taking actions relating to
maintenance or cleaning.
6.1. Clean the water filter once a month or more frequently depending on use. See also paragraph
3.10.
6.2. When obstruction of the nozzle is obtained very high pressure. Therefore, it is immediately
necessary cleaning. IMPORTANT: Instrument cleaning nozzle (5) should be used only when high
pressure cleaner is off!
6.3. Vent should always be clean and free.
6.4. If necessary, repair your high pressure cleaner power and is best carried out only by qualified
specialists in workshops RAIDER, which used only original spare parts. Thus ensuring their safe
operation.
7. Removal of possible malfunctions.
The table below shows signs of defects and how you can help if your power fails to operate
normally. If you can not find and fix the problem by following the instructions in the table, contact the
authorized service of Rider. Warning: Before you begin troubleshooting, high pressure cleaner and
stop it from the supply network.
All manuals and user guides at all-guides.com
17
Publicité
