Black & Decker LGC120B Manuel D'instructions page 8

InSTALLIng / reMoVIng BATTerY PAcK
WArnIng:
Make certain the lock-off button is engaged to
prevent switch actuation before removing or installing battery.
To InSTALL BATTerY PAcK: Insert battery pack into tool until an
audible click is heard (figure B).
To reMoVe BATTerY PAcK: Depress the battery release button
in the back of the battery pack and pull battery pack out of tool
(figure B).
B
AUXILIArY HAndLe ASSeMBLY (FIg. c)
• Position handle on upper tube to desired height.
• Ensure locking block (8) is aligned with groove in tube.
• Assemble and tighten bolt (9).
c
8
PoLe eXTenSIon (FIg. d)
• Loosen collar (10).
• Extend poles to desired length.
• Tighten collar.
8
ASSeMBLY
9
d
10