Assembly Set Check List - Skandika CARDIOCROSS CARBON PRO II Instructions De Montage Et Mode D'emploi

Assembly set check list

Please check the assembly set for completeness.
Step 1
1x Lock washer 2x Flat washer
3/8"x19x1.5 (#94)
3/8"x2T (#120)
6x Round head Allen screw
3/8"x2 1/4" (#76)
Step 2
6x Round head Allen 6x Round Philips head tapping
screw 5/16"x15 (#75)
Step 3
2x Flat washer 2x Flat washer
3/8"x19x1.5 (#94)
5/16"x20x1,5 (#98)
Step 4
Tools
Allen key M5 with Philips head
screwdriver (#108)
5x Dome shaped Flat
washer 3/8"x23x2.0 (#114)
1x Hex head screw
screw Ø3.5x12 (#84)
2x Hex head screw
5/16"x32 (#71)
6x Round Philips head tapping screw
Ø3,5x12 (#84)
4x Round Philips head
screws M5x10 (#78)
3/8"x2" (#119)
2x Hex head screw
5/16"x15 (#70)
4x Locking hex head nut 1x Round head Allen screw
2x 5/16" (#105) 2x3/8" (#89)
12x Round Philips head tapping
screws M5x15 (#79)
12-Open-end wrench
(#110)
1x Hex head screw
3/8"x3/4" (#121)
2x Flat washer
5/16"x23x1.5 (#97)
1x Round head Allen screw
3/8"x1 1/2" (#155)
13/14 Open-end
wrench (#111)
2x Locking hex
head nut 3/8"x7T
(#89)
2x Wave washer
Ø17x23 (#101)
3/8"x2" (#156)
29