Publicité
Les langues disponibles
Les langues disponibles
Connecting the TV
For more information on connections, refer
to the Help Guide.
Note
• When connecting the cable to the Cable/
Antenna, input finger tighten only, over
tightening the connection can damage the TV.
• For the FMP-X1, connect it to the HDMI IN 2 jack
only (The availability depends on region).
• To select an input device connected to the TV,
press INPUT.
Recommendation for an F type plug
Projection of the inner wire from the
connection part must be less than 1.5 mm.
7 mm max.
1.5 mm max.
(Reference drawing for an F type plug)
To detach the terminal cover
The terminal cover is factory-attached to
the TV.
Before connecting cables, remove the
terminal cover.
XBR-75X940C
XBR-65X930C
Note
• After connecting all cables, re-attach the
terminal cover to the TV.
14
US
Showing a Set Top Box with
COMPONENT connection
Set Top Box
Publicité
