Sony BRAVIA XBR-75X940C Manuel De Référence page 13

Attaching the Table-Top
Stand (Alternative)
You can change the Table-Top Stand from
the edge to the middle position by referring
to the instructions below.
Middle position
Note
• Two or more people are needed to carry out this
installation.
• Be careful not to pinch the finger during
installation.
1
Thick cushion
1.5 N∙m/1,5 N∙m
2
{15 kgf∙cm}
Note
• Two or more people are needed to carry out this
installation.
• Ensure that there are no objects in front of the
TV.
IR Sensor
To bundle the cables
*1 Location of cable clamper when the Table-Top
Stand is attached to middle position.
*2 Location of cable clamper when the Table-Top
Stand is attached to edge position.
Note
• To detach the cable clamper from the TV, press
the top of the clamper , then pinch  as
illustrated.
3D Sync
Transmitter
US
1
*
2
*
13
US