HOMCOM 820-291V80 Instructions De Montage page 27

-Using the flame control
Press the flame button (5) to set the height of flames. The levels are shown in the
display. The flames are shown in the display (1). The flame settings are as follows:
-Regardless of the previous flame setting, when switched off by the main power
button, the flames will come on at L3 (high) when turned back on.
When the heating function is on, the flame will cycle between the three different
levels continuously.
-Using the main power button
Press the power button (6) to turn the unit on and off.
26
EN