HOMCOM 820-291V80 Instructions De Montage page 24

EN
STEP 1
Put the EVA cushion gasket in (as shown below), which softens the impact between
the wood cabinet and fireplace.
STEP 2
Remove the unit from its packaging, laying out all spare parts on the floor. Ensure
there are no items left in the packaging.
STEP 3
Carefully install the unit from the back of the mantel, using the opening in the
centre.
Check the alignments, then attach the unit by inserting screws through the drilled
holes, which is on the trim of the mantel.
Note: Do not attempt to install the unit from the front of the mantel. It will not fit.
23