OVE SIERRA 60 Mode D'emploi page 12

1. Install the 2 top rollers (H) on the door glass panel (J). Use a ratchet to strongly tighten the bolts.
2. Insert the door bottom seal strip (O) onto the door panel (J).
3. Gently hang the door panel by its 2 top rollers on the support bar (F) and make sure to place the bottom of
the door inside the guide (Q).
4-6. Install the 2 glass panels seal strips (P). Install the 2 small seal rubber strips (L) onto the glass panels.
Install the door's vertical seal strip (R) on the closing end.
7. Position the 2 roller stoppers (E) in order to block the door panel (J) from hitting the walls either when
opening it or closing it. Use the Allen key to strongly secure the stoppers when their final position is found.
8. Install the 2 anti-jump pegs (I) on the door glass panel (J). Use a ratchet to strongly tighten the bolts.
9. Using silicone, install the decorative metal track (U) in front of the door panel. Slide the decorative end caps
(T) onto the track.
DOOR PANEL INSTALLATION
7
E
J
1
H
J
3
F
5
L
8
HH
I
12
2
HH
4
P
J
6
J
9
T
J
O
R
U