Percent Weighing - KERN KIB-TM Notice D'utilisation Et D'installation

7.11 Percent weighing

Percentage weighing allows you to display the weight in percent related to
reference weight.
 Press
in weighing mode (approx. 3 sec.) until "rEF 10%"
is displayed.
 Use
to set the desired percentage value to be applied
as reference (selectable rEF 10, rEF 20, rEF 50, rEF 100,
rEF 200, rEF 500).
 Place a sample matching the set percentage value on the
weighing platform and press
displayed.
 The percentage value for the sample will be displayed.
 Remove reference weight
 The display returns to „0.0 %"
 Put on specimen
 In the display appears the percentage of the specimen with
reference to the reference weight.
 Back to weighing mode by pressing the
KIB-TM-BA_IA-e-1811
. "-------%" will be briefly
button.
31