Publicité
Les langues disponibles
Les langues disponibles
3.0 Fit
NOTE: Correct fi t is an essential element of bicycling safety, performance
and comfort. Making the adjustments to your Zigo® Leader™ which result
in correct fi t for your body and riding conditions requires experience, skill
and special tools. Always have a bicycle dealer make the adjustments on
your Leader®; or, if you have the experience, skill and tools, have a bicycle
dealer check your work before riding.
WARNING: If your bicycle does not fi t properly, you may lose control
and fall. If your new bike doesn't fi t, ask a bicycle dealer to adjust it before
you ride it.
3.1 Adjustment range
The limiting dimension of fi t adjustment on your Zigo® Leader™ Cycle is
determined by saddle height range. You must be able to adjust your saddle
position as described in 3.2 without exceeding the limits set by the height of the
top of the seat tube and the "Minimum Insertion" or "Maximum Extension" mark
on the seat post.
3.2 Saddle position
Correct saddle adjustment is an important factor in getting the most
performance and comfort from your bicycle. If the saddle position is not
comfortable for you, see a bicycle dealer.
The saddle can be adjusted in three
directions:
1. Up and down adjustment. To check for
correct saddle height (Fig. 1):
• sit on the saddle;
• place one heel on a pedal;
• rotate the crank until the pedal
with your heel on it is in the down
position and the crank arm is
parallel to the seat tube.
If your leg is not completely straight, your
15
Publicité
