Texas Equipment RMX 500 Manuel D'utilisation page 50

4. Preparation before installation
It is recommended to make a sketch of one's lawn with the obstacles that you as a user
want to protect. It provides a good overview of the work with cable laying, as well as the
best location for the charging station.
Draw the boundary wire from the charging station around the garden and around any
obstacles you want to protect, such as flower beds, small trees, etc.
The following chapter explains how to install the robotic lawn mower. Therefore, read this
chapter carefully before planning and installing the boundary wire.
Also check the expected need for boundary wire (length). Plenty of cable is included to
surround lawns up to the capacity limit, but if you have many flower beds (islands) inside
the lawn where the cable will go around, it can consume many meters of extra cable. Here
it may be necessary to purchase additional boundary cable and extend it.
50