Black & Decker PRMP1000 Manuel D'utilisation page 7

• Fit the motor unit (1) to the lid (8) &
rotate it clockwise to lock it in place
• Press the on/off (2) or turbo (3) button &
insert ingredients through the chute. The
pusher (17) can be used to guide
ingredients to the blade.
• Once shredding / slicing is completed,
unplug the appliance & allow the blades
to stop moving.
• Press the motor unit button (8a) and
rotate the motor unit anti-clockwise to
remove. Press the bowl lid lock buttons
(8b) to remove the lid and safety lid.
• Carefully remove the drive spindle &
chopping blade before transferring the
ingredients to a suitable container.
• Do not operate when the appliance is
empty.
Operating times and preparations
Ingredients Maximum Speed
Quantities
Onions (Cut in 8) 500g
Garlic (Cut in 8) 500g
Parsley 100g
Raw meat 400g
(fat free)
Nuts 300g
Fruits 700g
Biscuit 300g
Carrots 400g
Carrots 400g
Radish 400g
Potato 400g
Squash 800g
Cucumber 800g
All manuals and user guides at all-guides.com
Time Blade
(Sec)
On/turbo 3-6 Chopping
On/turbo 3-6 Chopping
On/turbo 5-10 Chopping
Turbo 10 Chopping
On/turbo 5-10 Chopping
Turbo 10 Chopping
On/turbo 5-10 Chopping
On/turbo 5-10 Chopping
On/turbo 5-10 Shredding
Turbo 5-10 Shredding
On/turbo 5-10 Slicing
On/turbo 5-10 Slicing
On 5-10 Slicing
Switching on and o
Warning! Make sure your appliance
is switched o before connecting to
or disconnecting from the power supply.
Ensure that the voltage rating on the base
plate corresponds to the main voltage at
your home.
• To switch the appliance on, press the On
/ O button (1) or Turbo button (3)
• Keep the switch pressed for continuous
operation.
• To switch off, release the On / Off switch
(1) or Turbo button (3)
Warning! Do not operate the
appliance continuously for more
than 20 seconds. After operating the
appliance continuously for more than 20
seconds, let it cool down for at least 20
seconds before operating again.
Warning! This appliance is fitted
with a safety cut-out. If the
appliance stops working during use, please
unplug it and allow to cool to room
temperature before trying again.
Warning! After switching off always
allow the motor to stop before
approaching the blade.
Maintenance
Your Black+Decker stick blender has been
designed to operate over a long period of
time with a minimum of maintenance.
Continuous satisfactory operation depends
upon proper care and regular cleaning.
Warning! Before performing any
maintenance or cleaning of the stick
blender, disconnect the appliance from the
power supply.
ENGLISH
7