jbc ADVANCED Serie Mode D'emploi page 3

ENGLISH
SPECIFICATIONS
The AM 6000 is a rework station for through-hole and
SMT boards.
- AM 6000 230V
It contains 4 modules which cover the main rework
tasks:
- Hot air for desoldering any size of SMD
components.
The station uses the exclusive JBC system,
based on protectors-extractors and hot-air flow,
which makes desoldering clean and quick,
concentrating the heat on the IC, and protecting
the rest of the circuit at the same time.
A medium-sized SMD can be desoldered in less
than 20 seconds.
- Desoldering SMTs and cleaning of through-hole
components and pads by using the desoldering
iron DR 5600, which contains a self-contained
vacuum pump.
- Pick & Place MP 2260 pencil by suction to aid
components positioning.
- Soldering of all types of components, with the
swift response, power and temperature recovery
of the Advanced series. You can connect the
Advanced 2010, 2210, 2045 or 2245 handpieces
and the hot tweezers PA 1200 or PA 4200.
All manuals and user guides at all-guides.com
The station's components
- Control Unit with 900 W heater
- Handpiece 2245
Ref. 6000200
- Desoldering iron DR 5600
- Pick & Place MP 2260
- Heater stand JT 8700
- Extractor stand
- Set of 5 protectors (Fig. 1, page 128)
- Set of 5 extractors (Fig. 2, page 128)
- 2 tripods for the protectors (Fig. 1, page 128)
- Set of 4 suction cups
- 3 nozzles
- Suction tube with connectors
- Pedal with cable and connector
- Soldering iron stand AD 8200
- Desoldering iron stand DR 8500 Ref. 0788500
- External desoldering air filter
- Spare filters
- Set of accessories
- Set of suction cups Pick & Place Ref. 0940163
- Set of straight needles
- Set of bent needles
- Instruction manual
The AM 6000 station has the following
complementary products:
- Handpiece 2010
- Handpiece 2210
- Handpiece 2045
- Micro hot tweezers PA 1200
- Hot tweezers PA 4200
2
with the cartridge 2245-003
with the tip 5600-003
Accessories for the heater:
In order to make the nozzles removal easier, the
stand has a special bushing.(Fig. 3, page 128).
Accessories for the handpiece:
Accessories for the desoldering iron:
Accessories for the Pick & Place:
Ref. 2245000
Ref. 2245003
Ref. 5600000
Ref. 5600003
Ref. 2260000
Ref. 0828700
Ref. 0932845
Ref. 0930110
Ref. 0932330
Ref. 0964551
Ref. 0268200
Ref. 0821830
Ref. 0781046
Ref. 0780593
Ref. 0901546
Ref. 0861660
Ref. 0780448
Ref. 2010000
Ref. 2210000
Ref. 2045000
Ref. 1200000
Ref. 4200000