jbc ADVANCED Serie Mode D'emploi page 21

ENGLISH
HOT TWEEZERS
AM 6000 station allows to connect two different
models of tweezers, each one with its respective
range of cartridges and stand:
- Micro hot tweezers PA 1200 ref. 1200000.
- Hot tweezers PA 4200 ref. 4200000.
These articles are not delivered with the station.
Stand PA 8120
Ref. 0748120
Hot tweezers
PA 4200
Ref. 4200000
All manuals and user guides at all-guides.com
For tweezers to work properly, the following
components are required: control unit, hot tweezers,
a stand and a set of cartridges corresponding to
the chosen tweezer.
The tweezers are connected to the station in the
following way:
The cable connector of the tweezers is plugged
into the connector of the stand. The cable connector
of the stand is connected to the terminal of the
station. Please find the connection plan on figure.
Cartridges for the hot
tweezers PA 4200
20
Soldering
connector
SOLD
Stand PA 8110
Ref. 0748110
Micro hot tweezers
PA 1200
Ref. 1200000
Cartridges 1200