Publicité
Les langues disponibles
Les langues disponibles
Operation
3
3.1 Intended use
This appliance is intended only for
household use; it is not suitable for
professional use.
It is designed for chopping and
whisking small amounts of solid
food only.
3.2 Initial use
1. Clean the appliance parts before
initial use (see 4.1).
2. Use the appliance upright on
a balanced, flat, clean, dry and
non-skid surface.
3. Do not use the appliance
continuously for more than 10
seconds. Turn off the device
when used for more than 10
seconds and wait for 1 min.
before operating again.
10 / EN
All manuals and user guides at all-guides.com
3.3 Blending and
chopping with the
blending shaft
1. Insert blending shaft (1), by alig-
2. Put processed ingredients (in
3. Immerse blending shaft (1) into
4. Plug in the appliance.
5. Run the appliance by pressing
When you do not
exceed 10 seconds
in intermittent uses,
C
you can operate the
appliance until the
end of the process by
waiting for a couple
of seconds.
ning ( ) symbol on motor unit
(4) with ( ) symbol and turning
clockwise.
– Make sure ( ) symbol is
aligned with ( ) symbol. Fit it
into its place, do not apply too
much force.
small pieces) in measuring con-
tainer or a container that you
will use.
the container.
operation button (3).
Hand Blender/User Manual
Publicité
