Pioneer SUPER TUNER III D FH-P4200MP Mode D'emploi page 44

Section
11 Initial Settings
1 Press FUNCTION to select Dim.
Press FUNCTION repeatedly until Dim ap-
pears in the display.
2 Press a or b to turn Dim on or off.
Pressing a or b will turn Dim on or off and
that status will be displayed (e.g., Dim :ON).
Adjusting display contrast
Display contrast adjustment lets you adjust
the display for easier viewing when lighting
conditions change.
1 Press FUNCTION to select CONT.
Press FUNCTION repeatedly until CONT ap-
pears in the display.
2 Press c or d to adjust the contrast.
Each press of c or d increases or decreases
the contrast.
14  1 is displayed as the contrast is increased
or decreased.
Switching the RCA output
setting
This units RCA output can be used for sub-
woofer. You can select whether to use the sub-
woofer control (low pass filter) built-in
P/O:Subw or the auxiliary P/O:Full.
1 Press FUNCTION to select P/O.
Press FUNCTION repeatedly until P/O appears
in the display.
2 Press c or d to switch RCA output set-
ting.
Pressing c or d will switch between
P/O:Subw (subwoofer) and P/O:Full (non fad-
ing) and that status will be displayed.
44
En
All manuals and user guides at all-guides.com
Selecting the digital
attenuator
When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1 Press FUNCTION to select D.ATT.
Press FUNCTION repeatedly until D.ATT ap-
pears in the display.
2 Press c or d to switch D.ATT high or
low.
Pressing c or d will switch between
D.ATT: HI (high) and D.ATT:LOW (low) and
that status will be displayed.
# When the source is Cassette player, the digital
attenuator setting is fixed at Low.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
! The sound turns off, Mute or ATT is dis-
played and no audio adjustments are possi-
ble.
! Operation returns to normal when the
phone connection is ended.
1 Press FUNCTION to select Mute.
Press FUNCTION repeatedly until Mute ap-
pears in the display.