ClearSounds Talk500 Mode D'emploi page 15

information only if both you and the caller are in areas offering Caller ID
service, and if both telephone companies use compatible equipment.
Important: When using the Caller ID features, please note it is only available
at Caller ID mode (CLIP icon turns on). If the CLIP icon is off, press
button once.
Receiving a Call (Can be stored up to 64 calls)
• If an incorrect, invalid or incomplete Caller ID signal is received,
the display shows No NUMBER.
• If only the caller's phone number is received, the display shows
the caller's phone number with the time and date it was received.
The NEW icon turns on and NEW CALL LED blinks.
• If both the caller's name and phone number are received, the
display shows the caller's name and phone number, with the
time and date it was received. The "NEW" icon turns on and NEW
CALL LED blinks. Note: If the caller's name has more than 16
characters, only the first 16 characters will be displayed.
• Your unit displays incoming call waiting Caller ID information
while you are on another call. If you receive a call while the display
shows the CALL WAITING icon. Note: The Call Waiting information
will be disappear 20 seconds after you review it.
• If the name and number are not available due to the caller's
restriction, the display shows pRIVATE with the time and date
received. The NEW icon turns on and NEW CALL LED blinks.
• If the name and number are not available, the display will show
oUT oF AREA with the call's time and date. The NEW icon turns
on and NEW CALL LED blinks.
• If a long distance call message is received, the display will show
LoNG DISTANCE with the call's time and date. The NEW icon turns
on and NEW CALL LED blinks.
1. If the Caller ID memory is full, the oldest data will be removed on
a first-in/first-out basis.
2. If the Caller ID information received duplicates another call in memory,
the time/date will be updated and the REpEAT icon will be lit.
3. If no key is pressed within 20 seconds, the display will display
the total call counter, new call counter, current time and date.
View the Caller ID Memory
press to review more recent calls. The CALL# will decrease.
After you view the most recent data in memory, the display will show END
oF LIST.
All manuals and user guides at all-guides.com
please Note:
15 – ENGLISH