ClearSounds Talk500 Mode D'emploi page 14

1. press and release the MENU button until the SToRE NUMBER is
shown.
2. press the DIAL button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22
digits using the number pad and confirm with DIAL button.
4. press the memory button (M1, M2 and M3). The number has now
been saved and display shows SAVED!.
Dialing Using The Memory Buttons
1. Lift the handset or press
2. Select the required memory location (M1- M3) by pressing the
corresponding button.
1. pressing the corresponding button.
2. Lift the handset, press the DIAL button or press
number will dial out automatically.
You can store your VoICE MAIL box telephone number for easy
dailing
1. press and release the MENU button until the SToRE NUMBER is
shown.
2. press the DIAL button. The cursor will flash in the first position.
3. Enter the required telephone number with a maximum of 22
digits using the number pad and confirm with DIAL button.
4. press the memory button VoICE MAIL. The number has now been
saved and display show SAVED!.
To access your message(s):
1. press the VoICE MAIL button. Your call will be put through to the
mailbox and your message(s) played back to you.
2. Replace the handset to end the call.
Note: Subscription is required to use the Voice Mail service.
NOTE: In order to utilize the Caller ID features, you must subscribe to Caller
ID service through your local phone company. There are fees for Caller ID
services, and it may not be available in all areas. This product can provide
All manuals and user guides at all-guides.com
button and wait for a dial tone.
-oR-
Voice Mail
THE CALLER ID
14 – ENGLISH
button, the