Publicité
Les langues disponibles
Les langues disponibles
Parts identification
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Smooth roller
• It helps to slide on the
skin better.
5 Foil frame release buttons
6 Power switch
All manuals and user guides at all-guides.com
Back
a
b
c
b
d
f
e
g
7 Lamp display
a. Used time lamp
b. Battery capacity lamp
c. Shaving sensor lamp
(
)
d. Clean lamp (
)
e. Switch lock lamp (
f. Foil/blade check lamp
(
)
g. Charge status lamp
(
)
8 Appliance socket
9 Outer foil section
: System outer foil release
buttons
; Inner blades
< Trimmer
= Trimmer handle
> Main body rear terminals
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver.
2
Plug the adaptor into a
household outlet.
• Check that the charge status lamp
(
) is glowing.
• Charging is completed after approx.
1 hour.
• If the shape of the plug does not fit
the power outlet, use an attachment plug adaptor of the
proper configuration.
3
Disconnect the adaptor after charging is
completed.
)
Note
You cannot operate the shaver while charging.
B AC adaptor (RE7-87)
? Adaptor
@ Power plug
A Cord
B Appliance plug
Accessory
C Travel case
2
1
9
Publicité
