Publicité
Les langues disponibles
Les langues disponibles
Problem
The shaving sensor
responds even though the
shaver is not in contact
with the skin.
Operating time is short
even after charging.
Shaver does not operate
even after charging.
The driving sound
changes while shaving.
All manuals and user guides at all-guides.com
Action
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 12.)
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
When the number of operations
per charge starts to decrease, the
battery is nearing the end of its life.
The appliance may not operate in
an ambient temperature
approximately 5 °C (41 °F) or
lower.
The battery has reached the end
of its life.
The shaver will not operate with
the AC adaptor connected. Please
use the shaver after it has been
sufficiently charged and the AC
adaptor disconnected.
The shaving sensor is operating.
The sound changes depending on
the beard thickness.
Problem
Makes a loud sound.
The odor is getting
stronger.
Shavings fly out in all
directions.
System outer foil gets hot.
You do not get as close a
shave as before.
Action
The shaver makes a high‑pitched
sound due to the linear motor
drive. This does not indicate a
problem.
Confirm that the blades are
properly attached.
This can be improved by cleaning
every time after shaving.
This can be improved by cleaning
every time after shaving.
Replace the system outer foil if it
is damaged or deformed.
(See page 13.)
This can be improved by cleaning
every time after shaving.
Replace the system outer foil and/
or inner blades.
Expected life of system outer foil
and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
15
Publicité
