Publicité
Les langues disponibles
Les langues disponibles
While using
The used time and remaining
battery capacity are shown and
then turn off after 7 seconds.
• The shown time returns to
[0'00"] after 10 minutes.
• The shaving sensor lamp
(
) blinks.
When the battery capacity is low
"10%" appears and "
" blinks.
• You can shave 1 to 2 times after "10%" appears.
(This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
approximately 5 °C (41 °F) or lower.
• The shaving sensor may not respond depending on the type and
quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
• To prevent erroneous operation, place your fingers on the thumb
rest while using the shaver.
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver is not
operating (the switch lock is unlocked). (See page 12.)
You cannot shave in this mode.
All manuals and user guides at all-guides.com
After use
The used time and remaining
battery capacity blink
alternately and then turn off
after 8 seconds.
Locking/unlocking the power switch
Locking the power switch
1. Press
once
2. Press
and then release.
than 2 seconds.
• The shaver
• The switch lock
starts operating.
lamp (
up for 5 seconds
and turn off.
• The shaver will
stop operating.
Unlocking the power switch
1. Press
for more than
2 seconds.
• The switch lock lamp (
will turn off.
for more
3. Release
) will light
2. Once the shaver starts
operating, release
.
)
.
11
Publicité
