Samsung NX60 8 Serie Manuel D'installation page 3

Contents
Before you begin
Important safety information
Gas range components
What's in the box
Installation requirements
Location requirements
To avoid breakage
Gas requirements
Special gas requirements (gas models sold in massachusetts)
Electrical requirements
Installation instructions
Installing your gas range
Step 1. Unpack the range
Step 2. Connect the range to gas supply
Step 3. Convert to lp gas (optional)
Step 4. Install the anti-tip device
Step 5. Plug in and place
Step 6. Level the range
Step 7. Assemble the surface burners
Step 8. Check the ignition of surface burners
Step 9. Final installation checklist
Adjusting the oven burner air adjustment shutters
Before you begin
About this manual
3
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY.
4
Important note to the installer
11
• Read all instructions contained in these installation instructions before installing
the range.
11
• Remove all packing materials from the oven compartments before connecting the
electric and gas supply to the range.
13
• Observe all governing codes and ordinances.
13
• Be sure to leave these instructions with the consumer.
15
• Installation of this appliance requires basic mechanical skills.
16 • Proper installation is the responsibility of the installer.
17 • Product failure due to improper installation is not covered under the Warranty.
17
Important note to the consumer
19
Keep these instructions with your user manual for future reference.
• As when using any appliance generating heat, there are certain safety
19
precautions you should follow.
19
• Be sure your range is installed and grounded properly by a qualified installer or
19
service technician.
20
• Make sure the wall coverings around the range can withstand the heat generated
21
by the range.
21
• Cabinet storage space above the surface burners should be a minimum of 30 in
22
(76.2 cm).
22
Important note to the servicer
23
24
The electrical diagram is in an envelope attached to the back of the range.
24
English 3