Anslut 013881 Mode D'emploi page 15

TIMER: Press the button to activate
the timer function (0.5 to 8
hours). The set time is shown on
the display. Press the button for 3
seconds to increase the set time.
OSC: Press the button to start and
switch off the oscillation function.
MAINTENANCE
NOTE:
Pull out the plug from the power point before
installation and/or cleaning.
The product should be cleaned once a month.
1. Clean the fan with a soft cloth moistened
with a mild detergent. Make sure that no
water or other liquid gets into the fan.
2. Carefully remove the casing and take out
the air filter.
3. Rinse the air filter in running water.
4. Make sure the filter is completely dry
before putting it back.
5. Replace the air filter and the casing.
NOTE:
Do not use petrol, solvents or detergents that
can damage the plastic parts.
013881
Description
Maximum fan flow rate
Fan power input
Service value
Standby power consumption
Sound power level
Maximum flow speed
Annual power consumption
Operating value standard: IEC 60879:1986 (corr. 1992)
Contact: www.jula.com
Symbol Value
F 22,50
P 44,80
S 0,50
V
P 0,46
SB
L 59.57
WA
C 2,40
kWh/a 14,85
EN
Unit
m³/min
W
(m³/min) W
W
dB(A)
m/s
kWh/a
15