Anslut 013881 Mode D'emploi page 14

EN
a bath, shower or swimming
pool.
• Do not expose the product to
direct sunlight.
• Do not use product together
with an external speed
controller.
• Do not use the product near
flammable liquids or gas.
• Switch off the product and
pull out the plug before
cleaning.
• Never leave the product
unattended when switched
on.
• Repairs must only be carried
out by an authorised service
centre.
• If the product stops working
properly, switch it off with the
switch on the control panel
and contact the retailer.
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
14
TECHNICAL DATA
Rated voltage
Input power
Operating value
Power consumption in standby mode (Psb)
Safety class
Protection rating
Sound power level, LwA
Max flow speed
Max air speed
Operating value standard
IEC 60879:1986 (corr. 1992)
DESCRIPTION
1. Display
2. Air outlet
3. Base
4. Power cord
5. Air inlet
6. Control panel
7. Casing
8. Air filter
FIG. 1
USE
FUNCTIONS
Press the buttons on the control panel or
remote control as follows:
POWER: Press the power switch to
start and switch off the product.
SPEED: Press the button to set
the required fan speed (HI = high,
MED = medium, LOW = low).
MODE: Press the button to select
function mode – normal (NM),
natural (NT) or sleep mode (SL).
230 V ~ 50 Hz
50 W
0.50 (m³/min)/W
0.46 W
II
IP20
59.57 dB
22.50 m³/min
2.40 m/s