Lenze E94AYCCA Instructions De Montage page 46

All manuals and user guides at all-guides.com
8 Diagnostics
LED status displays
8 Diagnostics
LED status displays
LED
Pos. Colour
MS green
DE red
BS green
BE red
Status display (LED)
Connection status to the bus with the following signalling:
off
green
red
46
Condition
Description
On The communication module is supplied with voltage and
connected to the standard device.
blinking The communication module is supplied with voltage but not
connected to the standard device. (The standard device is either
switched off, in the initialisation phase or not available.)
On The communication module is not accepted by the standard
device.
The table below lists the signalling of the BS and BE bus LEDs.
The control of the LEDs complies with CiA specification DR−303−3.
Explanation
No connection to the master
CANopen status ("
CANopen fault ("
S
")
F
")
l
E94YCCA001D
EDK94AYCCA DE/EN/FR/ES/IT 3.0