Unitec MAB 150 Mode D'emploi page 8

Sa f e t y
D a n g e r f r o m e l e c t r i c c u r r e n t !
D A NGER
D a n g e r t o l i f e f r o m
C o n t a c t w i t h l i v e w i r e s o r c o m p o n e n t s
c a n l e a d t o s e r i o u s i n j u r y o r e v e n
d e a t h !
Observe the following safety precautions
to avoid any danger from electric current:
► Do not open the housing of the
machine. Risk of electric shock if live
terminals are touched.
► Never immerse the machine or the
plug into water or other liquids.
► Only use extension or cable drums
with a cable cross-section of at least
1.5 mm .
2
► Only use extension that are approved
for the place of work.
► Check the condition of the extension
cable regularly and replace if
damaged.
► Avoid direct body contact with
grounded parts (e.g., tubes, radiators,
steel girders) to reduce the risk of
electric shock in the event of a defect.
1 0
All manuals and user guides at all-guides.com
e l e c t r i c c u r r e n t !
R i s k o f i n j u r y !
W A R NING
Im p r o p e r h a n d l i n g o f t h e m a c h i n e
i n c r e a s e s t h e r i s k o f i n j u r y !
Observe the following safety precautions
to avoid injuring yourself and/or others:
► Operate the machine only with the
protective equipment stipulated
in these operating instructions
(see section Personal protective
equipment).
► D o n o t wear protective gloves when
the machine is running. A glove can
be caught by the drilling machine and
torn off the hand. Risk of losing one
or more fingers.
► Remove loose jewellery before
beginning work. Wear a hair net if you
have long hair.
► Always switch off the machine
before changing tools, performing
maintenance or cleaning. Wait until
the machine has come to a complete
standstill.
► Always disconnect the voltage supply
before changing tools, cleaning or
performing maintenance work in order
to avoid unintentional starting of the
machine.
► Do not put your hand into the
machine while it is in operation.
Remove swarf only when the machine
is at a standstill. Wear protective
gloves when removing swarf.
M A B 1 5 0