General Care - Loc8tor Tabcat Mode D'emploi

BATTERY
Tabcat Handheld:
If the Tabcat does not power up or lights are faint, replace the battery using 1 x CR2032 placing in the battery
compartment '+' side up. Battery compartment can be found on the back at the bottom. Slide down to open.
To change the battery in a Tag:
Use the Tag opening tool included and insert into small space on the side of the tag,
opposite where the lanyard hole is. Twist tool and Tag will pop open.
• Replace battery with new CR2032 battery, keeping the '+' side face up.
• Replace the lid by lining up the lanyard hole and pressing shut.
(Ensure the Tags are lined up correctly before closing shut.)
• If the battery is correctly inserted the Tag will beep when case is closed.
• To test the batteries, open the Tag, if it does not beep and flash – replace the batteries.
• If the Tag beeps once, it's registered. If it beeps twice it's unregistered.

GENERAL CARE

The Tabcat Tags have been designed to be water resistant but not waterproof. (We recommend using with splashproof
case provided for extra protection.)
• Never clean with water, detergent or cleaning agent – use a clean, dry cloth.
• The Tabcat Handset and Tags' operational temperature is between 0˚C to +55˚C.
• Storage temperature is between -10˚C and +60˚C.
• We strongly advise keeping the clear adhesive seal on your Tags for the first 30 days.
• PET SAFETY – Please check to ensure collar is not too loose, or tight, to avoid rubbing. Owners should be aware
of how to fit a collar correctly. For your cats comfort we recommend the collar/Tabcat is removed once a month
and checked.
• PRODUCT MAINTENANCE – We recommend removing the Tag from the silicone case every three months to
extract cat hair from inside the case and Tag. You must also check for damage to the silicone case. If any damage
has incurred, we recommend replacing it. The yellow seal inside the tag must not be removed at any time.
www.mytabcat.com
Lanyard hole
Insert here
9